•   DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height).

•   SAFE AREA: - 3.0Mtr x 1.7Mtr.

•   Chest press cum seated puller equipment made up of “C” Class G.I. pipe

      of different NB.

      NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe

•   Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith

    or Siddharth.

•   The center pipe is of 100NB made up of “C” Class G.I. pipe.

•   The bottom welded with support of M.S. round plate of Ø250 mm &

         10mm thickness.

•   The connecting pipes are made up from 25NB “C” class G.I. pipe.

•   The handle frame is made up from 32NB “C” class G.I. pipe.

•    To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used.

    •   The foundation used for fixing is a structure and made from center pipe

             of G.I. of 80 NB “C” class welded with M.S. round plate of Ø250 mm &

            10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3

             mm thickness and 20mm x 40mm CRC square pipes of 3mm

           thickness.

•   The seats and Back rests are fitted on the outer frames are

       made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and

    deep drawn and pressed in tools and dies to have

    uniform radius of 20 mm with no sharp edges.

•   Closing Caps are made up of high quality Fiber reinforced Plastic material.

•   Pins used of Diameter   25mm and 17mm are made up from SAE 8620

      bright material.

•    The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG).

•   High tensile steel with galvanized nuts & bolts are used for assembly.

•   The cerclips used for locking is made up of A24  & A16

•   The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Only On Defective Prosuct.

All Government Taxes & GST Included.

Extra Charge On Installation.