Cycle Economy (OG63)
Sansunfitness | Cycle Economy
21849
₹30,773
//php if ($product['product'][0]['is_on_sale'] == 1) { ?>
//php } else { ?>
28% off
//php } ?>
(Inclusive of all taxes)
-
No Warranty
-
COD Not Avilable
-
Non Returnable
-
Non cancelable
About this item
• DIMENSIONS: - 1570mm (Length) x 570mm (Width) x 900mm. (Height).
• SAFE AREA: - 2.5Mtr x 1.5Mtr.
• Cycle equipment made from “C” class G.I. Pipe of different NB. (NB stands
for Nominal
Bore Sizes i.e. Internal Diameter of pipe in millimeters).
• Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or
Siddharth.
• The main frame of 50 NB made from “C” Class G.I. pipes.
• M.S. round plate of Ø300 mm & 10mm thickness used to form a paddle assembly.
• The handle frame is of 25NB made from “C” Class G.I. pipe.
· The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.
• For foundation 32NB “C” class G.I. pipe used.
• Closing Caps are made up of high quality Fiber reinforced Plastic material.
• Pins used of Diameter 25mm are made up from SAE 8620 bright material.
• Pins used of Diameter 13mm are made up from EN8 material with
CRCA pipe 20X20mm of thickness 3.00mm for paddle assembly.
• The bearings used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG).
• High tensile steel with galvanized nuts and bolts are used for assembly.
• The circlip used for assembly are of A24 type.
• The powder coating done with Pure Polyester powders from Ackzonoble
or Berger Paints with 60 to 70 micron thickness.