Horse Rider (OG26)
Sansunfitness | Horse Rider
25140
₹35,408
//php if ($product['product'][0]['is_on_sale'] == 1) { ?>
//php } else { ?>
28% off
//php } ?>
(Inclusive of all taxes)
-
2
Warranty
-
COD Not Avilable
-
Non Returnable
-
Non cancelable
About this item
• DIMENSIONS: - 1180mm (Length) x 400mm (Width) x 1400mm. (Height).
• SAFE AREA: - 2.2Mtr x 1.4Mtr.
• Horse rider equipment made from “C” class G.I. Pipe of different NB.
NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in
millimeters
• Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or
Siddharth.
• The main frame of 100NB made from “C” Class G.I. pipes welded with M.S.
round plate of Ø250 mm & 10mm thick
• Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with
uniform outer edge radius 20mm.
• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.
• The leg movement frame is of 32NB made from “B” G.I. pipe.
• The handle frame is of 32 NB made from “B” Class G.I. pipe.
• The footrests are made from 25 NB “B” class G.I. pipe.
• Pins used of Diameter 17 mm are made up from SAE 8620 bright material.
• The bearings used are “6203zz” permanent lubricated sealed bearing of
reputed brand (SKF/FAG).
• High tensile steel with galvanized nuts & bolts are used for assembly.
• The circlips used for assembly are of A24 mm.
• The powder coating done with Pure Polyester powders of Ackzonoble
or Berger with 60 to 70 micron thickness.
Only On Defective Prosuct.
All Government Taxes & GST Included.
Extra Charge On Installation.