•   DIMENSIONS: - 1220mm (Length) x 550mm (Width) x 1700mm. (Height).

•   SAFE AREA: - 2Mtr x 1Mtr.

 •   Push up bar equipment made from “C” Class G.I. pipe of different NB.

NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.

  •  Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or

     Siddharth.

•   The main frame of 100 NB made from “C” Class G.I. pipe.

•    The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom.

•   The handle frame is of 25 NB made from “C” Class G.I. pipe.

•   The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.

•   Closing Caps are made up of high quality Fiber reinforced Plastic material.

  •   Foundation cover Closing Cap is made from FRP  Material.

•   High tensile steel with galvanized nuts & bolts are used for assembly.

 •         The powder coating done with Pure Polyester powders of Ackzonoble

     or Berger Paints with 60 to 70 micron thickness

Only On Defective Prosuct.

All Government Taxes & GST Included.

Extra Charge On Installation.