Download Kapcart App

<

Single Chest Press (OG36)

Sansunfitness | Single Chest Press

₹ 37,023.00 ₹52,145

(Inclusive of all taxes)

  • 2

    Warranty

  • COD Not Avilable

  • Non Returnable

  • Non cancelable

About this item


Made In: India


Brand Name: Sansunfitness


•   DIMENSIONS: - 9000mm (Length) x 710mm (Width) x 2200mm. (Height).

•   SAFE AREA: - 2.0Mtr x 1.7Mtr.

•   Chest press equipment made up of “C” Class G.I. pipe of different NB.

      NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.

•   Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth.

•   The center pipe is of 100NB made up of “C” Class G.I. pipe.

•   The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness.

•   The connecting pipes are made up from 25NB “C” class G.I. pipe.

•   The handle frame is made up from 32NB “C” class G.I. pipe.

•    To build structure bushes are used which are made from MS.seamless pipe of 60mm O.D. and                 5mm thickness as well as 60mm diameter solid bar bush is used.

    •   The foundation used for fixing is a structure and made from center pipe

            of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250 mm &

           10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3

            mm thickness and 20mm x 40mm CRC square pipes of 3mm  

            thickness.

     •   Foundation cover Closing Cap is made from  FRP  Material with

              0.7 mm thickness.

•   The seats and Back rests are fitted on the outer frames are

       made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and

    deep drawn and pressed in tools and dies to have

    uniform radius of 20 mm with no sharp edges.

•   Closing Caps are made up of high quality Fiber reinforced Plastic material.

•   Pins used of Diameter   25mm and 17mm are made up from SAE 8620

      bright material.

•    The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG).

•   High tensile steel with galvanized nuts & bolts are used for assembly.

•   The cerclips used for locking is made up of A24 mm & A16mm.

•   The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Only On Defective Prosuct.

All Government Taxes & GST Included.

Extra Charge On Installation

 

0 Review Of Product Single Chest Press (OG36)

No Faq

No FAQs Found

Forgot Password?
OR

No account Yet?