Standing Seating Twister ( OG18)
Sansunfitness | Standing Seating Twister
33686
₹47,445
//php if ($product['product'][0]['is_on_sale'] == 1) { ?>
//php } else { ?>
28% off
//php } ?>
(Inclusive of all taxes)
-
No Warranty
-
COD Not Avilable
-
Non Returnable
-
Non cancelable
About this item
• DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height).
• SAFE AREA: - 3 Mtr x 1Mtr.
• Seating & Standing Twister equipment made from “C” Class G.I. pipe of
different
NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in
millimeters.
• Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith
or Siddharth.
• The Center Pipe is of 100mm NB made from “C” Class G.I. Round Pipe.
• The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom.
• Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance.
• The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB,
And 25 NB made from “C” class G.I. pipe.
• The handle frame of Seating & Standing twister is 25 NB &
Foot resting frame of seating side is made from “C” class G.I. pipe of 25mm NB.
• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class, Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness.
• The Twister plate fitted on the bottom frame is made up of M.S. Round
Plate of size 300mm diameter and 10mm thickness.
• Closing Caps are made up of high quality Fiber reinforced Plastic material.
• The Pins used are made up of Ø 35 mm SAE 8620 bright material.
• The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG).
• High tensile steel with galvanized nuts & bolts are used for assembly.
• The powder coating is done by Pure Polyester powder of Berger Paint with
60 to 70 micron thickness