Triple Twister Standing Mini (OG51)
Sansunfitness | Triple Twister Standing
24682
₹34,763
//php if ($product['product'][0]['is_on_sale'] == 1) { ?>
//php } else { ?>
28% off
//php } ?>
(Inclusive of all taxes)
-
No Warranty
-
COD Not Avilable
-
Non Returnable
-
Non cancelable
About this item
• DIMENSIONS: - 1150mm (Length) x 1150mm (Width) x 1580mm. (Height).
• SAFE AREA: - Ø2.1Mtr.
• Triple Twister made from “C” Class Galvanized Iron (G.I.) Pipe of different
NB
NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in
millimeters.
• Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or
Siddharth.
• The Center Pipe is of 100NB made from “C” Class G.I. Round Pipe.
• The bottom support welded is of M.S. round plate of Ø250 mm & 10mm thick.
• The standing frame is of 32NB made from “C” class G.I. pipe.
• The handle frame of triple twister is of 25 mm NB made from “C” class G.I. pipe.
• The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness
• The standing plate is fitted on the frame made up of Ø 80 NB GI. pipe. M.S. Round Plate of size Ø300mm x 10mm thickness.
• Closing Caps are made up of high quality Fiber reinforced Plastic material.
• The Pins used are made up of Ø 35 mm SAE 8620 bright material.
• The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG).
• High tensile steel with galvanized nuts & bolts are used for assembly.
• The powder coating done with Pure Polyester powders from
Ackzonoble or Berger Paints with 60 to 70 micron thickness